Overview
How Joulo reads charging sessions from every supported charger brand, platform and protocol.
An integration is the path a charging session travels from your charger to the Joulo API. Joulo reads sessions over three routes. The route is a property of the hardware and of who operates it, not a preference you set.
The three routes
| Route | Who holds the credentials | Data arrives |
|---|---|---|
| Cloud API | The manufacturer or the platform operator | On a sync schedule, minutes after the session ends |
| OCPP 1.6J | Joulo, over a WebSocket to the charger | Live, while the car charges |
| No automatic route | Nobody | The charger cannot deliver session data to Joulo |
A charger that a CPO or an energy supplier already operates always takes the cloud route through that operator. Pointing such a charger at Joulo over OCPP cuts the operator's own services, so Joulo does not offer that.
Supported brands
| Brand | Route | API or protocol |
|---|---|---|
| ABB | OCPP 1.6J | ws://insecure-ocpp.joulo.net (plain WebSocket) |
| Alfen | OCPP 1.6J | wss://ocpp.joulo.nl |
| Charge Amps | Cloud API | Charge Amps eAPI v5 |
| Easee | Cloud API | Easee Cloud API |
| Ecotap | Cloud API | EVC-net (Last Mile Solutions) |
| Enphase | Cloud API | Enphase API v4 |
| EVBox | OCPP 1.6J | ws://insecure-ocpp.joulo.net |
| go-e | Cloud API | go-e Cloud API + session export |
| Hager | OCPP 1.6J | wss://ocpp.joulo.nl |
| KEBA | OCPP 1.6J | wss://ocpp.joulo.nl |
| NexBlue | Cloud API | NexBlue third-party OpenAPI |
| Ohme | Cloud API | Ohme API |
| Peblar | OCPP 1.6J | wss://ocpp.joulo.nl |
| Plugchoice | Cloud API | Plugchoice API v3 |
| Ratio | Cloud API, or OCPP 1.6J | Ratio ERE API |
| Smappee | Cloud API | Smappee Dev API v3 |
| SolarEdge | Session export | SolarEdge feed |
| Tesla | Cloud API | Tesla Fleet API |
| V2C | Cloud API | V2C Cloud |
| Victron | Cloud API | Victron VRM API |
| Volt Time | Cloud API | Plugchoice API v3 |
| Wallbox | Cloud API | Wallbox API |
| Zaptec | Cloud API | Zaptec Cloud API |
| OpenEVSE | No automatic route | Local network only |
Brands without a page here still connect. Any charger that speaks OCPP 1.6J reaches Joulo over the universal OCPP route. Platform accounts connect with the operator's own login. That covers 50five, Eneco eMobility, Monta, Vattenfall InCharge, EV Company and every EVC-net reseller. E-Flux by Road connects through Road's ERE API: the owner signs in at E-Flux and picks the chargers to share.
Sync cadence and freshness
Each cloud provider runs on its own schedule. The pages below give the cadence per brand. Two rules hold across all of them:
- Cadence is a capacity decision, not a promise per session. Joulo targets a freshness of under one hour for everything the dashboard shows. Most providers beat that by a wide margin.
- A re-run never double-counts. Every provider writes sessions through the same idempotent insert, keyed on the charger and the session start.
Session history is fetched with an overlap window rather than a cursor, so a missed tick repairs itself on the next run.
Backfill
Joulo backfills history to 1 January 2026, the date the Dutch ERE scheme started. How far back a brand actually reaches depends on the upstream API. Some keep a full history, some cap the window, and a few keep nothing at all. Each page states the limit where one exists.
Backfill never creates measurement. ERE registration counts only the kWh a MID-certified meter measured, so sessions recorded before a MID meter was in place never become eligible.
MID certification
mid_certified on the charger object says whether Joulo has proof of a MID-certified meter. One classifier decides it for every brand, in this order:
- Admin override, recorded for the NEa audit trail.
- Provider signal, when the integration reports something definitive. Tesla exposes a part number, Smappee a meter serial, OCPP a boot notification.
- Catalog match against the validated hardware matrix, per model.
- Unknown, which queues the charger for review.
An unknown verdict never replaces a stored one. Sessions still sync while a charger sits in review, and ERE eligibility stays closed until the verdict lands.